2K PS Max - Two-component polystyrene bitumen thick coating for maximum load
Strong against moisture and pressing water
2K PS Max from BITUTEC is a two-component, polymer-modified bitumen thick coating (PMBC) with polystyrene. Tested in accordance with DIN EN 15814 and applicable in accordance with DIN 18533, it offers an extended protection range - even against moderately pressing water up to an immersion depth of 3 m.
Product advantages
- Polystyrene filled - high stability and cost-effectiveness
- Solvent-free and environmentally friendly
- Crack-bridging and flexible (≥ 2 mm according to EN 15812)
- Radon gas-tight
- Long processing time (4-5 hours)
- Quickly rainproof
- Dries through seamlessly
- Resistant to frost and de-icing salt
- Can be stored frost-free for up to 12 months
Areas of application
- Waterproofing of components in contact with the ground:
- Basements, underground garages, foundations, floor slabs
- retaining walls, balconies, terraces
- Connections, pipe penetrations
- Perimeter area:
- Fixing of protection, drainage and insulation boards
- Suitable for:
- Concrete, barrier plaster, render, screed
- Brick, sand-lime brick, porous and hollow block masonry
Application - simple and efficient
- Substrate:
- Prepare in accordance with DIN 18533 Part 3
- Free of frost, oils, grease, edges and dirt
- Scratch coat recommended for concrete basements
- Mixture:
- Mix liquid and powder components thoroughly
- Stir homogeneously for at least 3 minutes
- Application:
- At least 2 coats
- Reinforcement inlay for areas at risk of cracking
- Apply with a smoothing trowel, trowel or spray technique
Why 2K PS Max?
- Maximum safety thanks to two-component polystyrene formulation
- Also suitable for pressing water up to 3 m deep
- Durable and economical to use
- Delivery form: 30 L hobbock
- White label branding available
