2K Fiber Classic S - Two-component, fiber-reinforced bitumen thick coating
Fiber-reinforced for greater safety and durability
The 2C Fiber Classic S from BITUTEC is a two-component, polymer-modified and fiber-reinforced bitumen thick coating (PMBC). Tested in accordance with DIN EN 15814 and applicable in accordance with DIN 18533, it permanently protects buildings against moisture, non-pressing water as well as splash water and ground moisture at the base.
Product advantages
- Fiber-reinforced - for increased stability and crack resistance
- Solvent-free and environmentally friendly
- Crack-bridging and flexible (≥ 2 mm according to EN 15812)
- Radon gas-tight
- Long processing time (4-5 hours)
- Quickly rainproof (after approx. 4 h)
- Easy to apply
- Dries through seamlessly
- Resistant to frost and de-icing salt
- Can be stored frost-free for up to 12 months
Areas of application
- Waterproofing of components in contact with the ground:
- Basements, foundations, floor slabs
- Underground garages, retaining walls
- Balconies, terraces
- Connections, pipe penetrations
- Perimeter area:
- Fixing of protection, drainage and insulation boards
- Suitable for:
- Concrete, barrier plaster, render, screed
- Brick, sand-lime brick, porous and hollow block masonry
Application - Fast and safe
- Substrate:
- Prepare in accordance with DIN 18533 Part 3
- Free of edges, frost, oil, grease, dirt and leaks
- Scratch coat required for concrete basements
- Primer recommended on absorbent substrates
- Mixture:
- Stir the liquid component thoroughly
- Slowly sprinkle in the powder component and mix homogeneously for at least 3 minutes
- Application:
- At least 2 coats
- Reinforcement inlay required in areas at risk of cracking
- Apply with a smoothing trowel, trowel or spray technique
Why choose 2K Fiber Classic S?
- Additional safety due to fiber reinforcement
- Resistant to moisture and aggressive water
- Easy application even on slightly damp substrates
- Delivery form: 30 kg hobbock
- White label branding available
