2K Fiber - Two-component, fiber-reinforced bitumen thick coating
High stability due to fiber reinforcement
The 2K Fiber from BITUTEC is a two-component, polymer-modified and fiber-reinforced bitumen thick coating (PMBC). Tested in accordance with DIN EN 15814 and applicable in accordance with DIN 18533, it offers increased crack resistance and long-lasting protection for structures in contact with the ground.
Product advantages
- Fiber-reinforced - additional stability and safety
- Two-component formulation - robust & resistant
- Solvent-free and environmentally friendly
- Crack-bridging and flexible (≥ 2 mm according to EN 15812)
- Radon gas-tight
- Long working time (4-5 hours)
- Quickly rainproof
- Dries through seamlessly
- Resistant to frost and de-icing salt
- Can be stored frost-free for up to 12 months
Areas of application
- Waterproofing of components in contact with the ground:
- Basements, underground garages, foundations, floor slabs
- retaining walls, balconies, terraces
- Connections, pipe penetrations
- Perimeter area:
- Fixing of protection, drainage and insulation boards
- Suitable for:
- Concrete, barrier plaster, render, screed
- Brick, sand-lime brick, porous and hollow block masonry
Application - simple and efficient
- Substrate:
- Prepare according to DIN 18533 Part 3
- Free of edges, frost, oils and dirt
- Scratch coat recommended for concrete basements
- Mixture:
- Stir liquid component vigorously
- Stir in powder component slowly
- Mix homogeneously for at least 3 minutes
- Application:
- At least 2 coats
- Reinforcement inlay for areas at risk of cracking
- Apply with a smoothing trowel, trowel or spray technique
Why 2K fiber?
- Reinforced formulation for maximum load-bearing capacity
- Safety even on surfaces subject to heavy wear
- Long-lasting protection against moisture and aggressive water
- Delivery form: 30 L hobbock
- White label branding available
